澳洲5开奖历史记录

- ${title}
正在装入...
澳洲5技巧

- ${title}
正在装入...
My Cart
Items
0
澳洲5开奖走势图

- ${title}
正在装入...

Description
Price
Quantity
澳洲5冷热号统计
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126716
21.20
Each
澳洲5开奖号码
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126717
67.70
Each
澳洲5开奖历史表
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126718
306.12
Each
澳洲5计划网
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126725
348.67
Each
澳洲5开奖记录网
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126728
22.86
Each
澳洲5现场开奖结果
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126729
72.10
Each
澳洲5精准计划
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126732
23.24
Each
澳洲5投注
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126733
67.01
Each
澳洲5在线投注
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126734
285.65
Each
澳洲5数据
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126740
24.20
Each
澳洲5最快开奖
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126741
71.16
Each
澳洲5怎么玩的
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Item#:
126742
289.28
Each